Smart short gun cabinet
1.Each cabinet adopts a 5-layer design,each layer stores 12 pistols or 12 sets of pistol protective gear,each cabinet stores a total of 60 various types of pistols,and the same number of magazines,oil cans,and straps are stored in the cabinet at the same time,Gun sights and other accessories.The layout is reasonable and beautiful,and the access does not interfere with each other.
2.The gun cabinet is made of high-quality carbon steel,with double doors,the cabinet body thickness is not less than 3mm,the door thickness is not less than 3mm,phosphating antirust and electrostatic spraying,the color is military green.The steel plate meets the requirements of GB/T2374-2207.
3.The smart short gun cabinet is equipped with a display module directly below or above the appropriate position of the grip of each pistol,which is used to display the gun number and gun user information in real time,and accept the command and control of the gun and ammunition intelligent management system.
4.The display module display parameters in the cabinet can display at least two lines of text,each line can display 15 characters.
5.Built-in anti-flame retardant buttstock,supports various gun card positions,the width can be adjusted arbitrarily,the gun will not swing when placed;there is no static electricity on the card board,inside and outside of the cabinet.After the cabinet door is locked,the inside and outside of the cabinet are opaque.
6.In the same organization,at the same time,only one leader has the authority to approve the use of guns,and the authorization can only be executed after fingerprint verification.
7.After the network authorization is passed,the cabinet door must be opened by fingerprint lock+mechanical lock,and two persons must operate at the same time to open it.The number of fingerprints stored in the fingerprint lock:no less than 10,and the false recognition rate is less than 0.000001%.The mechanical lock should meet the requirements of anti-drilling,anti-technical opening and 5.6 in GA/T73-1994 in 5.3,and support dual standby mechanical locks without electricity Emergency opening.
8.Cabinet door display size is not less than 8 inches,-35℃～+55℃normal work,core A7 above,resolution not less than 1280*800 64K true color;backlight type/lifetime/brightness at least:LED/20000Hrs/350cd/㎡.The display screen displays information such as equipment name,unit of use,inventory information,etc.,which are specifically set according to Party A's requirements.
9.The cabinet display has the function of automatic standby without instructions.
10.The cabinet display is dormant by default,with valid authorization or manual operation to trigger the display,ending dormancy and entering the normal display interface.
11.With gun video surveillance function.At least 6 miniature infrared automatic light-filling cameras(effective pixels not less than 1 million,resolution not less than 720TVL)are installed on both sides of the inner wall of each intelligent long and short gun cabinet.Cabinet personnel and internal guns are monitored in real time without dead ends.It can be screened through the guns and ammunition intelligent management system,and real-time remote video view the status of any gun in any gun cabinet.
12.Through infrared(micro-motion)detection,pressure sensing or mechanical lock mode,it can achieve the function of gun in-position detection and illegal departure alarm,and report to the platform for recording at the same time.
13.The cabinet power input is 220VAC;output:12V(stabilized voltage).
14.When an abnormal alarm occurs,it should be able to start the alarm simultaneous interpreter.